MSI MS-7242 User Manual download pdf (Page 92)

C-5

ATI SURROUNDVIEW

4. Unscrew or unfasten and remove any existing graphics card from your

computer.

5. Locate the appropriate slot and, if necessary, remove the metal back-plate

cover.

6. Align your graphics card with the slot and press it in firmly until the card is

fully seated.

7. Screw in or fasten the graphics card securely and replace the computer

cover.

8. Reconnect any cables you have disconnected and plug in the computer’s

power cord.

9. Turn on the monitor and then your computer. If you have properly installed

your graphics card, operating system messages will appear once the boot

procedure is finished.

Your monitor will be running in a basic video mode. Higher refresh rates are not

available at this stage of the installation. Once you have installed the proper drivers

and software, you can use the Display Properties control panel to adjust the video

settings and configure multiple monitors.

3. Remove the computer cover. If necessary, consult your computer’s manual

for help in removing the cover.

Important

WARNING - Remember to discharge your body’s static electricity by touch-

ing the power supply or the metal surface of the computer chassis.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 101 102

No comments

MSI MS-7242 User Manual Page 92