MSI MS-7374 User Manual download pdf (Page 23)

2-9

Hardware Setup

Important Notification about Power Issue

NForce chipset is very sensitive to ESD (Electrostatic Discharge), therefore this

issue mostly happens while the users intensively swap memory modules under S5

(power-off) states, and the power code is plugged while installing modules. Due to

several pins are very sensitive to ESD, so this kind of memory-replacement actions

might cause system chipset unable to boot. Please follow the following solution to

avoid this situation.

Unplug the AC power cable (shown in figure 1) or unplug all power connectors on

the mainboard (shown in figure 2) before the 1st installation or during system up-

grade procedure.

Figure 1:

Unplug the AC power cable

Figure 2: Unplug all the power connectors

Important

1. Make sure that all the connectors are connected to proper ATX power sup-

plies to ensure stable operation of the mainboard.

2. Power supply of 450 watts (and above) is highly recommended for system

stability.

3. We recommend you to use the minimum 450 watts power supply to support

the needs of SLI technology in the system.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 130 131

Daviddxm 11 Jan 2024 | 00:35:48

coin

MSI MS-7374 User Manual Page 23