MSI K9N Neo V3 Series User Manual download pdf (Page 46)

3-13

BIOS Setup

Power Button Function

This feature sets the function of the power button. Settings are:

[Power Off] The power button functions as normal power off button.

[Suspend] When you press the power button, the computer enters the

suspend/sleep mode, but if the button is pressed for more

than four seconds, the computer is turned off.

Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt

occurs. Settings are:

[Off] Always leaves the computer in the power off state.

[On] Always leaves the computer in the power on state.

[Last State] Restores the system to the status before power failure

or interrupt occurred.

Wake Up Event Setup

Press <Enter> and the following sub-menu appears.

Resume From S3 By PS/2 Keyboard

This setting determines whether the system will be awakened from what power

saving modes when input signal of the PS/2 keyboard is detected.

Resume From S3 By PS/2 Mouse

This setting determines whether the system will be awakened from what power

saving modes when input signal of the PS/2 mouse is detected.

Resume By PCI Device (PME#)

When set to [Enabled], the feature allows your system to be awakened from the

power saving modes through any event on PME (Power Management Event).

Resume By PCI-E Device

When set to [Enabled], the feature allows your system to be awakened from the

power saving modes through any event on PCI Express device.

Resume By RTC Alarm

The field is used to enable or disable the feature of booting up the system on a

scheduled time/date.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 116 117

No comments

MSI K9N Neo V3 Series User Manual Page 46