MSI 3200 Network User Manual
Browse online or download User Manual for Motherboards MSI 3200 Network. LAN Control Utility User Manual (for XD3200U
- Page / 17
- Table of contents
- BOOKMARKS
- LAN Control Utility 1
- User Manual (for XD3200U) 1
- Contents 1
- Preparation/SetUp 2
- Installation 3
- Connection 3
- When using a DHCP server 6
- When not using a DHCP server 7
- Telnet setting 8
- Preparation/SetUp (continued) 10
- Save and exit 11
- ProjectorView 12
- ProjectorView (continued) 13
- [ProjectorView main screen] 13
- E-mail notification function 14
- VIRTUAL REMOTE controller 14
- Initial setting 15
- [Notes on Instant Shut Down] 17
- [Terms and definitions] 17
Summary of Contents
EN-1LAN Control Utility User Manual (for XD3200U)ContentsPreparation/SetUp ...2P
EN-101Enter “3” and press the Enter key. 2To enable the e-mail notification function of ProjectorView, enter “1” and press the Enter key. (Default is O
EN-111Enter “9” and press the Enter key. 2The setting screen is shaded and the setting is updated.It takes about 10 seconds for the setting to be •up
EN-121Start the Projector-Control Device Installer.Select [Start] - [All Programs] - [Projector] - •[Projector-Control Device Installer] (in the case
EN-135The password input screen appears. Enter the password you set. The default password is admin.•(Note)If you input a wrong password 4 successive
EN-14ProjectorView (continued)VIRTUAL REMOTE controllerPut a checkmark in the box of the Virtual remote enabled on the ProjectorView main screen, and
EN-15Initial settingTo load information on the projector such as model name and lamp operating time, set the projector data in advance. Click the SETU
EN-16Support for the PJLink™ function This projector supports standard protocol PJLink™ for projector control and you can control and monitor projecto
EN-17[Notes on Instant Shut Down]Instant shutdown of the projector during control using the network function may cause ProjectorView to fail to displa
EN-2Preparation/SetUpPreparation before using the network functionThis projector is equipped with the network function to control and monitor the proj
EN-31Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the Tools folder of CD-ROM to the hard disk of your personal computer.2Double-click the
EN-4Preparation/SetUp (continued)4Select a folder to install the program, and click Next. 5Click Next. 6Installation starts.The progress of the instal
EN-51Start the Projector-Control Device Installer.Select [Start] - [All Programs] - [Projector] - •[Projector-Control Device Installer] (in the case
EN-65Select [Obtain an IP address automatically] and click Next. 6Click Next.Check that the options are marked with •checkmarks as shown on the right
EN-75Select [Assign a specific IP address] and click Next. 6Enter a fixed IP address (for example, 192.168.0.1) and click Next. (Note)Do not use 0 or 25
EN-81Start the Projector-Control Device Installer.Select [Start] - [All Programs] - [Projector] - •[Projector-Control Device Installer] (in the case
EN-91Enter “0” and press the Enter key. 2Input the old (current) password and press the Enter key. (Default password is admin.)If you input a wrong pa
Related products and manuals for Motherboards MSI 3200 Network
(117 pages)
(92 pages)
(52 pages)
(280 pages)
(25 pages)
(72 pages)
(73 pages)
(78 pages)
(108 pages)
(121 pages)
(173 pages)
(410 pages)
(54 pages)
(217 pages)
(148 pages)
© 2020, manymanuals.com. All rights reserved. | 0.184 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals