MSI MS-7211 Instruction Manual download pdf (Page 12)

MSI Reminds You...

1. Make sure your CPU cooler is firmly installed before turning on your system.

2. Check the information in PC Health Status of H/W Monitor in BIOS for the CPU

temperature.

3. Do not touch the CPU socket pins to avoid damage.

4. Whenever CPU is not installed, always protect your CPU socket pins with the plastic cap

covered to avoid damage.

5. Please note that the mating/unmating durability of the CPU is 20 cycles. Therefore, we

suggest you do not plug/unplug the CPU too often.

Memory

The mainboard provides two 184-pin unbuffered DDR333 / DDR400 DDR SDRAM, and supports

the memory size up to 2GB. To operate properly, at least one DIMM module must be installed.

(For the updated supporting memory modules, please visit

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_list.php)

Install at least one DIMM module on the slots. Memory modules can be installed on the slots in

any order. You can install either single- or double-sided modules to meet your own needs.

Installing DDR Modules

NotchVolt

1. The DDR DIMM has only one notch on the center of module. The module will only fit in the

right orientation.

2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the

golden finger on the memory module is deeply inserted in the socket.

3. The plastic clip at each side of the DIMM slot will automatically close.

Power Supply

The mainboard supports ATX power supply for the power system. Before inserting the power

supply connector, always make sure that all components are installed properly to ensure that no

damage will be caused. A 300W or above power supply is suggested.

+3.3V+3.3V

-12V

+3.3V

GNDGND

PS-ON#

+5V

GNDGND

GND

+5V

GNDGND

Res

PWR OK

+5V

5VSB

+5V

+12V

+5V

+12V

GNDNC

ATX 24-Pin Power Connector: CONN1

This connector allows you to connect an ATX 24-pin power supply.

To connect the ATX 24-pin power supply, make sure the plug of th

power supply is inserted in the proper orientation and the pins are

aligned. Then push down the power supply firmly into the

connector.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 94 95

Comments to this Manuals

No comments

MSI MS-7211 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for Motherboards MSI MS-7211