MSI MS-7345 User Manual download pdf (Page 22)

MS-7345 Mainboard

2-8

Installing Memory Modules

1. The memory module has only one notch on the center and will only fit in the right

orientation.

2. Insert the memory module vertically into the DIMM slot. Then push it in until the

golden finger on the memory module is deeply inserted in the DIMM slot.

3. The plastic clip at each side of the DIMM slot will automatically close.

Important

You can barely see the golden finger if the memory module is properly inserted

in the DIMM slot.

Volt

Notch

Important

-DDR2 memory modules are not interchangeable with DDR and the DDR2

standard is not backwards compatible. You should always install DDR2

memory modules in the DDR2 DIMM slots.

-In Dual-Channel mode, make sure that you install memory modules of the

same type and density in different channel DIMM slots.

-To enable successful system boot-up, always insert the memory modules

into the DIMM_A1 first.

7345 Neo2v1.0CH2 Hardware Setup.p65 2007/5/17, 上午 11:288

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 120 121

No comments

MSI MS-7345 User Manual Page 22