MSI MS-9105 Instruction Manual download pdf (Page 71)

AWARD

BIOS Setup

3-29

PnP/PCI Configurations

PNP OS Installed

When set to YES, BIOS will only initialize the PnP cards used for booting

(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operat-

ing system like Windows

95 or 98. When set to NO, BIOS will initialize all

the PnP cards. So, select Yes if the operating system is Plug & Play aware.

Reset Configuration Data

The ESCD (Extended System Configuration Data) is a method that the BIOS

uses to store resource information for both PNP and non PNP devices in a

bit string format. When Enabled, the system will rebuild ESCD and you will

see the message “ESCD Update Successfully” on boot up.

PCI/VGA Palette Snoop

PCI VGA palette is the set of colors currently used by the video device.

Some special VGA cards may not show colors correctly and need to look

into the video device’s VGA palette to determine what colors are in use.

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

PNP OS Installed No

Reset Configuration Data Disabled

PCI/VGA Palette Snoop Disabled

Assign IRQ For VGA Enabled

Assign IRQ For USB Enabled

Slot1/5 INTA Auto

Slot2/IDE RAID INTA Auto

Slot3/i82559 INTA Auto

Slot4 INTA Auto

PnP/PCI Configurations

Item Help

Menu Level 8

Select Yes if you are

using a Plug and Play

capable operating

system Select No if

you need the BIOS to

configure non-boot

devices

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 81 82

No comments

MSI MS-9105 Instruction Manual Page 71