MSI KT3 Ultra Instruction Manual download pdf (Page 25)

2-7

Hardware Setup

DIMM Module Combination

Install at least one DIMM module on the slots. Memory modules can be

installed on the slots in any order. You can install either single- or double-

sided modules to meet your own needs.

Memory modules can be installed in any combination as follows:

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The mod-

ule will only fit in the right orientation.

2. Insert the DIMM memory module vertically into the DIMM slot. Then

push it in until the golden finger on the memory module is deeply in-

serted in the socket.

3. The plastic clip at each side of the DIMM slot will automatically close.

S: Single Side D: Double Side

Slot Memory Module Total Memory

DIMM 1

(Bank 0 & 1)

S/D 64MB~1GB

DIMM 2

(Bank 2 & 3)

S/D 64MB~1GB

Maximum System Memory Supported

64MB~2GB

MSI Reminds You...

You can barely see the golden finger if the module is properly

inserted in the socket.

Volt

Notch

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 94 95

No comments

MSI KT3 Ultra Instruction Manual Page 25