MSI KT3 Ultra Instruction Manual download pdf (Page 80)

A-4

KT3 Ultra-C ATX Mainboard

Attaching Speakers

To perform multichannel audio operation, connect multiple speakers to

the system. You should connect the same number of speakers as the audio

channels you will select in the software utility.

The audio connectors on the back panel already provide 2-channel

analog audio output function. The back panel’s audio connectors can be

transformed to 4-/6-channel analog audio connectors automatically when

you select correct setting in the software utility. For information about the

setting, refer to Selecting 4- or 6-Channel Setting later in the section.

Make sure all speakers are connected to Line Out connectors. Diverse

connector configurations for 2-, 4- and 6-channel using back panel connec-

tors are described on the next page

Using 4- or 6-Channel Audio Function

After installing the audio driver, you are able to use the 4-/6-channel

audio feature now. To enable 4- or 6-channel audio operation, first connect 4

or 6 speakers to the appropriate audio connectors, and then select 4- or 6-

channel audio setting in the software utility.

MSI Reminds You...

If the Center and Subwoofer speaker exchange their audio chan-

nels when you play video or music on the computer, a converter

may be required to exchange center and subwoofer audio

signals. You can purchase the converter from a speaker store.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 94 95

No comments

MSI KT3 Ultra Instruction Manual Page 80