MSI KT3 Ultra Instruction Manual download pdf (Page 47)

3-2

KT3 Ultra-C ATX Mainboard

Entering Setup

Power on the computer and the system will start POST (Power On Self

Test) process. When the message below appears on the screen, press <DEL>

key to enter Setup.

DEL:Setup F11:Boot Menu F12:Network boot TAB:Logo

If the message disappears before you respond and you still wish to enter

Setup, restart the system by turning it OFF and On or pressing the RESET

button. You may also restart the system by simultaneously pressing <Ctrl>,

<Alt>, and <Delete> keys.

Selecting the First Boot Device

You are allowed to select the 1st boot device without entering the BIOS

setup utility by pressing <F11>. When the same message as listed above

appears on the screen, press <F11> to trigger the boot menu.

The POST messages might pass by too quickly for you to respond in

time. If so, restart the system and press <F11> after around 2 or 3 seconds to

activate the boot menu similar to the following.

The boot menu will list all the bootable devices. Select the one you want

to boot from by using arrow keys and then pressing <Enter>. The system will

boot from the selected device. The selection will not make changes to the

settings in the BIOS setup utility, so next time when you power on the system,

it will still use the original first boot device to boot up.

Select First Boot Device

Floppy : 1st Floppy

IDE-0 : IBM-DTLA-307038

CDROM : ATAPI CD-ROM DRIVE 40X M

[Up/Dn] Select [RETURN] Boot [ESC] cancel

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 94 95

No comments

MSI KT3 Ultra Instruction Manual Page 47