MSI K9N Neo V3 Series User Manual download pdf (Page 85)

B-9

nVidia RAID

NVIDIA RAID Utility Installation

Installing the NVIDIA RAID Software Under Windows

(for Non-bootable RAID Array)

The existing Windows IDE Parallel ATA driver (as well as the Serial ATA driver if SATA

is enabled) must be upgraded to use the NVIDIA IDE Parallel ATA driver (as well as the

NV Serial ATA driver if SATA is enabled).

This section describes how to run the setup application and install the RAID software

which will upgrade the Windows IDE driver and install the RAID software.

1.Start the NVIDIA nForce Drivers installation program to open the NVIDIA Windows

nForce Drivers page.

2.Select the modules that you want to install. Make sure that the “NVIDIA IDE Driver”

is selected.

3.Click Next and then follow the instructions.

4.After the installation is completed, be sure to reboot the PC.

5.After the reboot, initialize the newly created array.

Important

You must install the NVIDIA IDE driver in order to enable NVIDIA

RAID. If you do not install the NVIDIA IDE driver, NVIDIA RAID will not be

worked.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 116 117

No comments

MSI K9N Neo V3 Series User Manual Page 85