MSI K9N Neo V3 Series User Manual download pdf (Page 41)

3-8

MS-7369 Mainboard

Boot Sector Protection

This function protects the BIOS from accidental corruption by unauthorized users or

computer viruses. When enabled, the BIOS’ data cannot be changed when attempt-

ing to update the BIOS with a Flash utility. To successfully update the BIOS, you’ll

need to disable this Flash BIOS Protection function.

You should enable this function at all times. The only time when you need to disable

it is when you want to update the BIOS. After updating the BIOS, you should immedi-

ately re-enable it to protect it against viruses.

Full Screen LOGO Display

This item enables you to show the company logo on the bootup screen. Settings are:

[Enabled] Shows a still image (logo) on the full screen at boot.

[Disabled] Shows the POST messages at boot.

Quick Booting

Setting the item to [Enabled] allows the system to boot within 10 seconds since it will

skip some check items.

Boot Up Num-Lock LED

This setting is to set the Num Lock status when the system is powered on. Setting to

[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]

will allow users to use the arrow keys on the numeric keypad.

IOAPIC Function

This field is used to enable or disable the APIC (Advanced Programmable Interrupt

Controller). Due to compliance with PC2001 design guide, the system is able to run in

APIC mode. Enabling APIC mode will expand available IRQ resources for the system.

Advanced BIOS Features

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 116 117

No comments

MSI K9N Neo V3 Series User Manual Page 41