MSI K9N Neo V3 Series User Manual download pdf (Page 40)

3-7

BIOS Setup

Device/ Vendor/ Size

It will showing the device information that you connected to the IDE/SATA

connectors.

LBA/Large Mode

This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA

mode if the device supports it and the devices is not already formatted with LBA

mode disabled.

DMA Mode

Select DMA Mode.

Hard Disk S.M.A.R.T.

This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting

Technology) capability for the hard disks. S.M.A.R.T. is a utility that monitors

your disk status to predict hard disk failure. This gives you an opportunity to

move data from a hard disk that is going to fail to a safe place before the hard

disk becomes offline.

Floppy Drive A

This item allows you to set the type of floppy drives installed. Available options:

[None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].

Important

IDE Primary Master/ Slave & Serial-ATA1~4 are appearing when you

connect the HD devices to the SATA connector on the mainboard.

This sub-menu shows the CPU information, BIOS version and memory status of your

system (read only).

System Information

Press <Enter> to enter the sub-menu, and the following screen appears.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 116 117

No comments

MSI K9N Neo V3 Series User Manual Page 40