4-8 MegaCLI Command Tool
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
4.5.2 Set BIOS Options
Use the command in Table 4 . 9 to set the options for the BIOS status.
4.6 Event Log Commands
4.6.1 Manage the Event Log Entries
Use the command in Table 4. 1 0 to manage the event entries in the event
log for the selected adapter(s).
Table 4.9 Set BIOS Options
Syntax CmdTool –AdpBIOS -Enbl|-Dsbl|-Dsply| SOE | BE -aN|-a0,1,2|-aALL
Description Sets BIOS options. The following are the settings you can select on a single adapter,
multiple adapters, or all adapters:
• -Enbl, -Dsbl, -Dsply: Enables, disables or displays the BIOS status on
selected adapter(s).
• -SOE: Stops on BIOS errors during POST for selected adapter(s). When set to
-SOE, the BIOS stops in case of a problem with the configuration. This gives you
the option to enter the configuration utility to resolve the problem. This is available
only when you enable the BIOS status.
• -BE: Bypasses BIOS errors during POST. This is available only when you enable
the BIOS status.
Table 4.10 Event Log Management
Syntax CmdTool –AdpEventLog –GetEventlogInfo |{–GetEvents | GetSinceShutdown|
GetSinceReboot | IncludeDeleted | {GetLatest <number>} –f <filename>}
|Clear -aN|-a0,1,2|-aALL
Comments to this Manuals