Msi X2-109 v1 User Manual download pdf (Page 64)

4-12 MegaCLI Command Tool

4.7.4 Clear Existing Configuration

Use the command in Table 4 . 1 4 to clear the existing storage

configuration on the selected adapter(s).

4.7.5 Display Existing Configuration

Use the command in Ta bl e 4. 1 5 to display the logical drive and physical

disk drive information for the configuration on the selected adapter(s).

This command also provides information about the remaining

unconfigured space.

4.7.6 Save Adapter Configuration

Use the command in Table 4 .1 6 to save the configuration for the selected

adapter(s) to the given filename.

Description Creates a RAID level 10 (spanned) configuration from the specified arrays. Even if

no configuration is present, you must use this option to write the configuration to the

adapter.

Multiple arrays are specified using the –ArrayX[E0:Sn,...] option. (Note that X

starts from 0, not 1.) All the arrays must have the same number of physical drives.

At least two arrays must be provided. The options {WT |WB} {NORA | RA | ADRA}

{Direct | Cached} must be entered in the sequence that is shown.

Table 4.13 Add RAID 10 Configuration (Cont.)

Table 4.14 Clear Existing Configuration

Syntax CmdTool –CfgClr -aN|-a0,1,2|-aALL

Description Clears the existing storage configuration.

Table 4.15 Display Existing Configuration

Syntax CmdTool -CfgDsply -aN|-a0,1,2|-aALL

Description Displays the existing configuration on the selected adapter(s), which includes the

logical drive and component physical drive related details.

Table 4.16 Save Adapter Configuration

Syntax CmdTool –CfgSave –fFileName -aN

Description Saves the configuration for the selected adapter(s) to the given filename, in binary

format. The command also stores the controller properties structure in the file.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 131 132

No comments

Msi X2-109 v1 User Manual Page 64