Msi X2-109 v1 User Manual download pdf (Page 69)

Physical Drive Commands 4-17

4.8.7 Display Number of Logical Drives

Use the command in Table 4 . 2 6 to display the number of logical drives

attached to the adapter.

4.9 Physical Drive Commands

You can use the commands in this section to select settings for the

physical disk drives and perform actions on them.

4.9.1 Display Physical Disk Drive Information

Use the command in Ta b l e 4 . 27 to display information about the physical

disk drives on the selected adapter(s).

4.9.2 Set Physical Disk Drive State to Online

Use the command in Ta b l e 4 . 2 8 to set the state of a physical disk drive

to Online. In an online state, the physical drive is working normally and

is a part of a configured logical drive.

Table 4.26 Display Number of Logical Drives

Syntax CmdTool –LDGetNum –aN|-a0,1,2|-aALL

Description Displays the number of logical drives attached to the adapter. The return value is the

number of logical drives.

Table 4.27 Display Physical Disk Drive Information

Syntax CmdTool –PDInfo -aN|-a0,1,2|-aALL -PhysDrv[E0:Sn....]

Description Provides information about the physical disk drives connected to the enclosure and

adapter slot. The information includes the drive type, drive size, serial number, and

firmware version. For SAS devices, this includes additional information such as the

SAS address of the drive.

Table 4.28 Set Physical Disk Drive State to Online

Syntax CmdTool –PDOnline -PhysDrv[E0:Sn....] -aN|-a0,1,2|-aALL

Description Changes the physical disk drive state to Online.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 131 132

No comments

Msi X2-109 v1 User Manual Page 69