Msi X2-109 v1 User Manual download pdf (Page 65)

Configuration Commands 4-13

4.7.7 Restore Configuration Data from File

Use the command in Table 4 . 1 7 to read the configuration from the file

and load it on the selected adapter(s). You can restore the read/write

properties and RAID configuration using hotspares.

4.7.8 Delete Logical Drive(s)

Use the command in Table 4. 18 to delete one or more logical drives on

the selected adapter(s).

4.7.9 Display Free Space

Use the command in Table 4 . 19 to display the free space that is available

to use for configuration on the selected adapter(s).

Table 4.17 Restore Configuration Data from File

Syntax CmdTool –CfgRestore –fFileName -aN

Description Reads the configuration from the file and loads it on the adapter. MegaCLI can store

or restore all read and write adapter properties, all read and write properties for

logical drives, and the RAID configuration including hotspares.

Note the following:

The -CfgSave option stores the configuration data and adapter properties in the file.

Configuration data has only the device ID and sequence number information of the

physical drives used in the configuration. The CfgRestore option will fail if the same

device IDs of the physical drives are not present.

Table 4.18 Delete Logical Drives

Syntax CmdTool –CfgLDDel–Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL

Description Deletes one logical drive, multiple logical drives, or all the selected logical drives on

selected adapter(s).

Table 4.19 Display Free Space

Syntax CmdTool –CfgFreeSpaceInfo -aN|-a0,1,2|-aALL

Description Displays all the free space available for configuration on the selected adapter(s). The

information includes the number of disk groups, the number of spans in each disk

group, the number of free space slots in each disk group, the start block, and the

size (in both blocks and megabytes) of each free space slot.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 131 132

No comments

Msi X2-109 v1 User Manual Page 65