Msi X2-109 v1 User Manual download pdf (Page 66)

4-14 MegaCLI Command Tool

4.8 Logical Drive Commands

You can use the commands in this section to select settings for the

logical drives and to perform actions on them.

4.8.1 Display Logical Drive Information

Use the command in Table 4 . 2 0 to display information about logical

drives on the selected adapter(s).

4.8.2 Display Logical Drive Disk Cache Settings

Use the command in Table 4. 2 1 to display the disk cache settings for the

logical drive(s) on the selected adapter(s).

4.8.3 Manage Logical Drive Initialization

Use the command in Table 4 . 2 2 to manage initialization of the logical

drive(s) on the selected adapter(s).

Note

: In all operating system environments except DOS, the OS

driver starts the initialization process when this command is

issued. In DOS, however, there is no OS driver, so the

MegaCLI CT just marks the drives for initialization. The

initialization actually starts when the driver loads.

Table 4.20 Display Logical Drive Information

Syntax CmdTool –LDInfo –Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL

Description Displays information about the logical drive(s) on the selected adapter(s). This

information includes the name, RAID level, RAID level qualifier, size in megabytes,

state, stripe size, number of drives, and span depth. Also displays activity progress,

if any, including initialization, background initialization, and consistency check.

Table 4.21 Display Logical Drive Cache Settings

Syntax CmdTool –LDGetProp -DskCache -Lx|-L0,1,2| -Lall -aN|-a0,1,2|-aALL

Description Displays the disk cache settings of the logical drive(s):

-DskCache: Displays physical disk cache policy.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 131 132

No comments

Msi X2-109 v1 User Manual Page 66