MSI MS-6496 User Manual download pdf (Page 20)

Report No： 085006R-ITCEP07V04

Page: 17 of 162

Conducted susceptibility

As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025:

1999[2], the requirements for measurement uncertainty in CS testing are deemed to have

been satisfied, and the testing is reported in accordance with the relevant CS standards.

The immunity test signal from the CS system meet the required specifications in IEC

61000-4-6 through the calibration for unmodulated signal and monitoring for the test level

with the uncertainty evaluation report for the injected modulated signal level through CDN

and EM Clamp/Direct Injection as being 3.72 dB and 2.78 dB.

Power frequency magnetic field

As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025:

1999[2], the requirements for measurement uncertainty in PFM testing are deemed to have

been satisfied, and the testing is reported in accordance with the relevant PFM standards.

The immunity test signal from the PFM system meet the required specifications in IEC

61000-4-8 through the calibration report with the calibrated uncertainty for the Gauss Meter

to verify the output level of magnetic field strength as being 2 %.

Voltage dips and interruption

As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025:

1999[2], the requirements for measurement uncertainty in DIP testing are deemed to have

been satisfied, and the testing is reported in accordance with the relevant DIP standards.

The immunity test signal from the DIP system meet the required specifications in IEC

61000-4-11 through the calibration report with the calibrated uncertainty for the waveform of

voltage and timing as being 1.63 % and 2.76%.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 164 165

No comments

MSI MS-6496 User Manual Page 20